Welcome to the Shenzhen Jiwei Automations Ltd.

+86 755 28407683

Float-11P Coated Type

Float-11P Coated Type Level Indicator

● Imported plastic reed is used, has longer service life.

 Bright LED display header, can be installed horizontally or vertically, convenient observation for variety occasions.

● Certificated with both Flame-proof (Ex d IIC T6) and Intrinsic Safety (Ex ia IIC T6).
● Unique sealing techniques, the protection rate reaches to IP66/67.
● Coating with PP/PTFE, can be applied to strong corrosive liquid measurements
  • Float-11P Coated Type Level Indicator adopts unique coating design, making guide tube and floating ball to achieve optimal matching state, which ensures the floating ball sliding up and down smoothly. The entire production process is being strictly management and inspection, ensuring all Jiwei products has high reliability. Float-11P is designed to measure strong corrosive liquid, can be widely used in chemical industry, oil refining, storage, transportation, water treatment and other industries.
  • Float-11 series are based on Archimedes Buoyancy Principle, the float rise sand falls as the level of container changes. Due to the magnetic effect, the reed switch of float level indicator is magnetically attracted, making the resistance value of sensor changes linearly, and then the change of resistance value is converted into 4mA ~ 20mA standard DC signal output to achieve long-range detection and control. According to different chemical properties of liquid, products made by different materials can be selected to match; for different liquid density, different float balls can be selected to reach optimal measurement accuracy.

  • ● Imported plastic reed is used, has longer service life.
    ● Bright LED display header, can be installed horizontally or vertically, convenient observation for variety occasions.
    ● Certificated with both Flame-proof (Ex d IIC T6) and Intrinsic Safety (Ex ia IIC T6).
    ● Unique sealing techniques, the protection rate reaches to IP66/67.
    ● Coating with PP/PTFE, can be applied to strong corrosive liquid measurements
  • Measuring medium

    Liquid

    Measuring range

    300--6000mm

    Medium Density

    0.5g/cm³

    Process pressure

    25bar

    Process temperature

    -20℃~+120

    Ambient temperature

    -4070

    Process fitting

    Flange

    Accuracy

    ±5mm/±10mm

    Guide tube diameter

    φ21* 2mm,

    φ14* 1mm

    Housing

    Aluminum

    Wetted material

    (float/guide tube/process fitting)

    PTFE

    PP

    Protection rating

    IP66/67

    Signal output

    4-20mA

    Power

    18-36V DC

    Explosion-proof

    Ex dC T6

    Ex iaC T6


  • For acid and alkali storage tank in chemical process.
    For level control in bio pharmaceutical reaction tank.
  • Float-11P Coated Type Level Indicator
Online Service
Service Service Service Service
Scan the QR code to the mobile Web

x